Bingo Plus

List of the catalog of this article:

• 1, How to use the car meter?
• 2、How to use the car meter
• 3,Bingo Plus How to adjust the car mileage?

How to use the car meter?

1. The method used by the car meter adjuster is to insert the meter host into the car cigarette lighter jack, open the car key (not start the engine), and start working. Adjust the adjustment button on the meter regulator to adjust the speed of the car to the speed required by the car owner.

2. If it is a mechanical odometer, you need to disassemble the dashboard when tuning, and use the cone to adjust the gear of the odometer counter to adjust the reading; if it is an electronic odometer, the dashboard can be disassembled or not.

3. Press and hold the switch key for 3 seconds. There will be a switch button for total mileage and small mileage on the instrument. The small mileage can be called up and held down the switch key for 3 seconds to clear zero. The total mileage cannot be cleared to zero, but the total mileage can be adjusted through the instrument in the auto parts city. Car instruments tend to be electronic.

4. Start the car and move the car back and forth. Plug the meter into the power supply of the cigarette lighter and open the car key. Some automatic transmission models need to be hung on the gear. Features and usage Nowadays, the degree of electronicization of automobiles is very high. The odometer is electronic instead of mechanical flexible shaft transmission, and the odometer can no longer be adjusted by dialing digital wheels.

5. The regulator is a very practical tool used to adjust the voltage, frequency and other parameters in electronic equipment. Before using the scaler, you need to understand some basic knowledge and operation methods. First of all, it is necessary to confirm whether the power supply of the device to be adjusted has been disconnected, and that the capacitor and inductance in the device have been discharged.

6. Turn the thimble part of the regulator to a position parallel to the edge. Find the direction of the arrow of the watch axis, and the direction of the arrow is to adjust the thimble of the watch. If you can't find the arrow part, you can observe the size of the holes on both sides of the strap and aim the thimble of the strap regulator with the small hole.

car How to use the meter adjuster

The method of using the car meter adjuster is to insert the meter host into the car cigarette lighter jack, open the car key (do not start the engine), and start working. Adjust the adjustment button on the meter regulator to adjust the speed of the car to the speed required by the car owner.

Press and hold the switch key for 3 seconds. There will be a switch button for total mileage and small mileage on the instrument. The small mileage can be called up and held down the switch key for 3 seconds to clear zero. The total mileage cannot be cleared to zero, but the total mileage can be adjusted through the instrument in the auto parts city.Car instruments tend to be electronic.

Insert the regulator host into the car cigarette lighter jack, open the car key (do not start the engine), and start working. Adjust the adjustment button on the regulator to adjust the speed of the car to the speed you need. The number of Volkswagen New Jetta odometers can indicate the cumulative total mileage and one-way mileage. Only when the ignition switch is turned on can the watch work.

If it is a mechanical odometer, you need to remove the dashboard when adjusting it, and use the cone to adjust the gears of the odometer to adjust the readings; if it is an electronic odometer, the dashboard can be removed or not.

Introduction to adjust the mileage: Find the clutch shell of the car. This position is different. Some are on the odometer sensor plug of the transmission or drive shaft, and then gently pull it out by hand;Then insert the instrument output insert into the signal jack in the pulled sensor pin.

How to adjust the car mileage?

How to adjust the mileage of the car: there will be an opening key for the total mileage and a small mileage on the instrument. The small mileage can be cleared by holding down the opening key for 3 seconds; the car instrument tends to be electronic.

Step: Find the clutch shell of the car. This position is different. Some of them are on the odometer sensor plugs of the gearbox or drive shaft, and then gently pull them out by hand. Then insert the output insert of the meter walker into the signal jack in the pulled-out sensor pin.

Method 1: Purchase tools to adjust the odometer. Nowadays, almost all electronic odometers of cars can be adjusted. The method is to rewrite the data of the chip in the instrument with a programmer and a data cable;If you want to adjust the odometer by yourself, you can only buy a set of tools to adjust the odometer. Now you need a programmer to adjust the odometer with a data cable with the software.