UEFA Champions League live

List of this article:

• 1,UEFA Champions League liveHow to clean the car water tank
• 2, Engine water tank cleaning method
• 3, How to clean the car water tank

How to clean the car water tank

1. Generally speaking, there are three common cleaning methods: manual cleaning must be adopted, the car garage must be removed, and the scale must be removed with manual hammers, planers, shovels, etc.

2. Cleaning the water tank includes the outside and the inside: internal cleaning: you need to buy a special cleaning agent to add to the water tank. After a few minutes of engine ignition cycle, soak for several hours and discharge.

3. The method of cleaning the water tank of the car is as follows: when the temperature of the coolant drops, open the expansion kettle and fill the water tank with rust remover. Start the engine and idle for 5 to 10 minutes until the cooling fan is working. Turn off the engine and remove the front bumper of the vehicle. Do not break the fixed latch.

4. The cleaning method of automobile water tank is such asNext: Stop the vehicle and turn off the engine. After the coolant temperature drops, open the expansion kettle and add water tank cleaner. Start the engine and idle for 5-10 minutes until the cooling fan is working. Turn off the engine and remove the front bumper of the vehicle.

5. The manual cleaning method needs to disassemble the car water tank and remove the scale with manual hammers, scrapers, shovels, etc.; the descaling efficiency is low, the labor intensity is high, it is not easy to clean up, and it is easy to cause secondary damage to the water tank. Ordinary scale cleaning agent needs to disassemble the water tank, which is not thorough, has a strong odor and is corrosive, which is easy to cause the aging of the water tank and shorten its service life.

6. Prepare tools: water, soap or detergent, rag or towel, kerosene, gauze, crushed ice. Prepare for cleaning: first fill up the car with gasoline, and then at the water tank mouth and water tank shellOpen the mouth and add a small bowl of soap or detergent, rinse the residual gasoline in the water tank, rinse it into a light blue, and stwister the water tank.

Engine water tank cleaning method

Manual cleaning method: The car water tank needs to be disassembled, and the scale needs to be removed with manual hammer, scraper and shovel. The descaling efficiency is low, the labor intensity is high, it is not easy to clean, and it is easy to cause secondary damage to the water tank.

The method of cleaning the water tank of the car is as follows: when the temperature of the coolant drops, open the expansion kettle and fill the water tank with rust remover. Start the engine and idle for 5 to 10 minutes until the cooling fan is working. Turn off the engine and remove the front bumper of the vehicle. Do not break the fixed latch.

Cleaning method of car water tankIf there is scale in the car water tank, you can use water tank cleaner to clean and descale, manual cleaning, ordinary scale cleaning agent, and professional car water tank descaling agent. Car water tank scaling can be cleaned and descaled with water tank cleaner. General cleaning agents cannot completely remove scale and acidic substances in the waterway.

How to clean the engine water tank: If there is dirt in the car water tank, you can use water tank cleaner to clean and descale it. General cleaning agents cannot completely remove the scale and sour taste in the waterway. Sometimes it can be soaked in a large area, but this will block the waterway. Sometimes the water tank can be removed for cleaning.

There are three methods in total: manual cleaning method, ordinary scale cleaner and professional scale cleaner. The manual cleaning method requires disassembling the car water tank and manually using hammers, scrapers, shovels and other tools to remove scale.

How to clean the car water tank

Cleaning the water tank includes the outside and the inside: internal cleaning: need to be purchased exclusively The cleaning agent is added to the water tank. After the engine ignition cycle for a few minutes, it can be soaked for several hours and discharged.

Because "calcium carbonate/magnesium" is a large amount in raw waterThe substances contained will be precipitated in a high-temperature environment, that is to say, the use of raw water to clean up is "making scale", and this method should not be used again.

Manual cleaning method: The car water tank needs to be disassembled, and the scale needs to be removed with a manual hammer, scraper and shovel. The descaling efficiency is low, the labor intensity is high, it is not easy to clean, and it is easy to cause secondary damage to the water tank.

Step 1- Start First, make sure that the engine is cold. The high-temperature engine indicates that the water tank is filled with extremely high-pressure high-temperature coolant - and may be burned when the water tank lid is opened. Cold water will also damage the high-heat engine. Step 2 - Clean the water tank. Open and fix the hood firmly to avoid accidental slipping.