UEFA EURO

1. Engine failure: red fault light and buzzer sound indicate a major engine failure, such as serious Engine overheating, engine oil pressure is too low or engine fire, etc.

2. The alarm is too sensitive, so if there is a little wind and grass around the car, it will keep ringing. In this case, just adjust it. If the door switch fails, the alarm will also sound. You need to go to the repair site for repair.

3. If the seat belt is not fastened, the buzzer will ring. If the door is not closed, the buzzer will ring. If the car is not buckled, the buzzer will ring.

What's the matter with the sudden call to the police while the Dongfeng Tuyi car was driving?

1. The alarm is too sensitive, so a little wind and grass around the car will keep ringing. In this case, just adjust it. If the door switch fails, the alarm will also sound. You need to go to the repair site for repair. Anti-theft, there is a sensitivity adjustment twist on the vibration sensor of the anti-theft device, just fine-tune it.

2. If the seat belt on the main driver's side is not fastened, as long as the speed exceeds 5 kilometers, the vehicle will still sound an alarm, and the owner will be reminded through the instrument that the seat belt is not fastened.

3. Analysis of the cause and solution of the beep alarm in the car driving: the car's anti-theft device is too sensitive, and the excessive swing of the car causes the car's anti-theft alarm to emit a beep alarm. Solution: There is a sensitivity adjustment twist on the vibration sensor of the anti-theft device. Just fine-tune it.The main control door wire fault, commonly known as the door touch switch failure.

4. The sensitivity of the trigger is too high: this is also one of the reasons why many car alarms sound for no reason. There will be intermittent situations in the middle of this kind of alarm. This alarm will only work when there is a vibration or a little noise. Sometimes, if the vibration is too loud, it will also cause the car alarm to work.

5. The car alarm keeps ringing, which may be because the sensitivity of the anti-theft alarm is too high. When the equipment feels a little vibration, it will cause the alarm to sound. As for how to solve it, first find the host of the anti-theft device, which is generally the guard under the steering wheel and under the a-pillar.

6. Hello! The following situations are as follows when the car is starting and driving: the combustion state is not good: sendThe poor combustion state of the motive is the main reason why the engine fault light turns on. Due to the inaccurate coordination between the various parts of the engine, the combustion state of the engine is not good, causing the engine indicator light to light up.

What is Dongfeng logo car alarm light (stop)What is the fault

Dongfeng sign car alarm light (stop) indicates that the brake fluid level is low, and the brake fluid needs to be replenished immediately. The brake fluid has the characteristics of water absorption, and there will be boiling point reduction, pollution and different degrees of oxidation deterioration. If it is not replaced for a long time, it will corrode the brake system, bringing hidden dangers to driving.

The stop of the car refers to the mandatory parking alarm. In this case, the engine should be stopped in time. The alarm light is mainly caused by too low oil pressure, too low brake fluid level, and too high water temperature.

Meaning: It is a forced parking alarm light, which should be turned on at the same time as an alarm light such as oil pressure, brake fluid level is too low, water temperature is too high, etc., and the engine must stop running.

and turn off the engine. The lamp is with the machine.If the oil pressure, the brake fluid level is too low, the water temperature is too high, etc. are on at the same time, and the engine must stop running. The warning light is connected to the warning lights of "engine oil pressure", "low brake fluid level", "coolant thermometer" and "electronic brake power distribution system failure".